Dover Markem-Imaje SmartDate X60 - Replacing the Ribbon Guide Rollers

215 10056272-AA
 Replacing the Ribbon Guide Rollers
The ribbon guide rollers are vulnerable to damage through misuse and may have to be
changed if they become bent or damaged.
1
Remove the damaged roller by applying
a spanner to the two flat surfaces at the
base of the roller.
2
Place the damaged roller to the side.
3
Before fitting a replacement roller, apply
Loctite to the screw thread at the base of
the roller.
Maintenance
for parts & service call QLC (800) 837-1309