Description
31 10056272-AA
Device Settings Files
These are the specific parameter settings for the device.
Settings files are normally attached to a Job file which is downloaded to a device.
The settings may include information such as Print Darkness levels or Date offset rules
for a particular product.
The configuration of individual settings will depend on the printing conditions required
for specific Jobs.
The substrate being used or the speed required for printing a particular Job may require
the Device settings to be altered.
By attaching a Device settings file to a Job the SmartDate X60 is configured accordingly
when the Job is selected.
Device settings can be adjusted at the SmartDate X60 user interface but Device set-
tings files can only be created by connecting CoLOS Control.
These files can then be saved as a .Settings file and can be attached to specific Jobs.
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
