Printer configuration
166 10056272-AA
Ribbon Setup
The Ribbon Setup menu allows you to configure various ribbon specific settings.
This enables the Controller to fine tune printer settings to suit individual ribbon types.
The following Ribbon Setup options can be configured:
Setting Description
Ribbon Grade
Range: 3100, 3410, 3510, 3810,
3820, 3910, 4910, 5810, Non
Markem-Imaje
Default: 3810
This allows user to set the grade of the ribbon being used.
Ribbon Colour
Range: BK, WE, GD, BE, BN, CN,
GN, RD, YW.
Default: BK
This allows user to set the colour of the ribbon being used.
The options will depend upon the grade selected.
No options with Non Markem-Imaje ribbon.
Ribbon Width
Range: 20mm, 25mm, 30mm, 35mm,
40mm, 45mm, 50mm, 55mm.
Default: 55mm
This allows user to set the width of the ribbon being used.
The options will depend upon the printhead width selected.
New Ribbon Length
Range: 100 to 900
Default: 900
This option is displayed if Non Markem-Imaje ribbon is selected.
This allows you to set the length of ribbon being used.
New Outside Diameter
Range: 40.0 to 100.0 mm
Default: 98.0 mm
This option is displayed if Non Markem-Imaje ribbon is selected.
This allows you to set the outside diameter of ribbon being used.
Core Outside Diameter
Range: 30.0 to 35.0 mm
Default: 32.0 mm
This option is displayed if Non Markem-Imaje ribbon is selected.
This allows you to set the outside diameter of ribbon core being used.
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
