Dover Markem-Imaje SmartDate X60 - Machine Settings

Printer configuration
155 10056272-AA
 Machine Settings
1
Menu
Settings
Machine
Settings
Enable
Security
Flex I/O
Map
Custom
codes
Display
Settings
Adjust
RTC
Language
From the Settings screen select Machine
Settings.
If an Access Code is prompted for enter the
code.
2
Settings
Registration
Offset
Rotation
Max Print
Width
Registration
Adjust
Machine Settings
Encoder
Print
Position
Ribbon Setup
Use the Left and Right Arrows
to move to the required set of options.
Use the Up
and Down Arrows
to select the setting to be configured.
Use the Notebook
to configure the
setting.
The Machine Settings Menus allow you to:
- Configure the Machine specific settings of the printer.
- Configure the Image settings.
- Configure the Print Feature settings.
- Configure the Print Initiation settings.
- Configure the Print Quality settings.
- Configure the Encoder settings.
- Configure the Print Position settings.
- Configure the Ribbon settings.
- Configure the Ribbon Monitoring settings.
- Configure the Communications settings (Comms)
- Configure the Speed Profile settings.
- Configure the NGPCL settings.
- Configure the Logging settings.
- Configure the External Scratch pad Registers
for parts & service call QLC (800) 837-1309