Dover Markem-Imaje SmartDate X60 - Usage; Dot Check History; Firmware History

83 10056272-AA
 Usage
This screen allows you to view information with regard to the performance of the printer.
Usage Description
Print Count Number of print cycles performed
Ribbon KM Amount of ribbon fed past the printhead
Direct Thermal KM Amount of substrate fed past the printhead
Darkness
Last known printhead darkness setting value
used to print
Print Speed Maximum darkness value used to print
Maximum Print
Speed
Last known print speed averaged over one
hour of production
Minimum Ribbon
Width
Minimum ribbon width fitted while printing
Temperature Last known temperature while printing
Maximum Tempera-
ture
Maximum temperature value recorded while
printing
 Dot Check History
If a printhead dot (resistor) is damaged the Smartdate will record the printhead width
and the date that any new printhead damage occurred.
This data can be recorded to a Log file if required.
 Firmware History
This screen displays the date of any firmware changes that have taken place.
Operation
for parts & service call QLC (800) 837-1309