External links
234 10056272-AA
Control I/O Connections
A 15-way cable with a D-type plug connector on the rear of the Controller provides:
– Connection to the PRINT GO input.
– Access to the Fault and Warning Status outputs.
– Access to the User configurable Digital I/O
Pin Description
1 +24 VDC - I/O
2
PRINT GO Input
(PNP sensor or +24V Switched)
Controller PCB Link - X11
Position A -PNP
3 0 V - I/O
4
User Configurable Digital Input 1
(PNP sensor or +24V Switched)
Controller PCB Link - X12
Position A -PNP
5 Reserved
6 Reserved
7 Fault Output (Contacts Open for Fault)
8 Fault Output (Contacts Open for Fault)
9 Warning Output (Contacts Close on Warning)
10 Warning Output (Contacts Close on Warning)
11 User Configurable Digital Output 1# (24V PNP)
12 0 V - I/O
13 User Configurable Digital Output 2# (24V PNP)
14 Reserved
15 Reserved
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
