Dover Markem-Imaje SmartDate X60 - High Speed Options; Threshold (ON;OFF)

108 10056272-AA
 High Speed Options
High Speed mode is a menu-selected option.
When DISABLED, the printer runs as standard and produces the full density, high
quality image as expected.
When the mode is ENABLED, the user can set the threshold from which it begins to
operate.
This can range from 30 mm/sec to 700 mm/sec.
When High Speed mode is selected and the running speed reaches the selected
threshold speed, the printer automatically changes to High Speed mode
operation.
Once High Speed mode is operating, the resulting print quality is slightly lower
than standard, but it offers all of the above listed benefits.
For information on how to enable High Speed mode, please refer to Section 6.
The following information is relevant to High Speed mode on the SmartDate X60:
 Threshold (ON/OFF)
The DEFAULT setting for High Speed mode is DISABLED.
When DISABLED, the machine operates in normal operating mode where the
print speed remains constant.
When High Speed mode is ENABLED, a threshold speed must be set.
Once High Speed mode is enabled, settings such as background energy levels
are adjusted to optimise operation in High Speed mode. However, on certain
substrates these energy levels may need to be manually adjusted to optimise
performance.
Contact your Markem-Imaje Business Centre before attempting to perform these
adjustments.
Operation
for parts & service call QLC (800) 837-1309