Printer configuration
168 10056272-AA
Communications
The Comms menu allows you to configure the communications options.
The following Communication options can be configured:
Setting Description
IP Address
Range: LAN Specific
Default: 010.000.000.015
This allows you to assign an IP address to the SmartDate X60.
Always consult your IT department before configuring an IP address.
IP Subnet Mask
Range: LAN Specific
Default: 255.255.255.000
This allows you to define the Subnet Mask for your specific LAN
IP Gateway
Range: As required
Default: 010.000.000.001
This allows you to define the IP Gateway for your specific LAN
DCP Actor Name
Range: As required
Default: Actor 1
This allows you to assign a suitable Actor name as required when using DCP.
Re-power required after adding or changing the actor name.
Serial Port 1 Function
Range: NGPCL (RS-232)
Default: NGPCL
This allows you to select the communication protocol required for Serial Port 1.
Serial Port 1 Baud
Range: 9600, 19200, 38400, 57600,
115000
Default: 9600
This allows you to set the Baud rate for Serial port 1.
RS-232 Character Set
Range: ASCII or Unicode
Default: ASCII
This allows you to select the character set required for RS-232 communication.
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
