Dover Markem-Imaje SmartDate X60 - Print Initiation Settings

Printer configuration
162 10056272-AA
 Print Quality
The Print Quality menu allows you to configure settings that control the quality of the
printed image.
The following Print Quality options can be configured:
Setting Description
Print Darkness
Range: 80 to 140%
Default: 100%
This allows you to set the Darkness level for the print.
Print Darkness Adjust
Range: -25% to +25%
Default: 0
This allows you to set a printer specific darkness level for the printer.
If a Job includes a print darkness setting this may produce different quality prints
on individual machines.
This adjustment compensates for any differences.
Contrast 4
Range: 60 to 99%
Default:
This defines the contrast weighting when subsequent dots are driven
(53mm printhead only)
Contrast 5
Range: 80 to 140%
Default:
This defines the contrast weighting when adjacent dots are driven.
Head Out Time
Range: 0 - 100ms
Default: 25ms
This allows you to set the time delay between moving the head out and starting to
print. This ensures that the Printhead is in position before printing starts.
Head In Time
Range: 0 to 200 ms
Default: 3 ms
This allows you to set the time delay between the end of print and the next stage of
the print cycle.
for parts & service call QLC (800) 837-1309