Dover Markem-Imaje SmartDate X60 - Job Setup Menus; Job Setup Using the Default Print Design

128 10056272-AA
 Job Setup Menus
SmartDate X60 provides several different ways of selecting a new Job.
Job Setup depends if the Default Job is to be used, or where Job information is stored.
e.g. In the SmartDate X60 Local database or at a Host PC running CoLOS Control.
 Job Setup using the Default Print Design.
This option allows you to enter up to four lines of text at the User interface. The size and
type of font is limited to 8 point Arial bold.
This type of design does not support live updates, such as Time and Date fields, Best
Before Dates or Shift Codes.
1
Ready
Default job
From the Home screen press the Select
Job button under the main screen or
use the Select Job option from the Menu
screen.
2
Home
Default
Job 2
Select Job
Select the Default job from the from the
list available.
Job selection
for parts & service call QLC (800) 837-1309