Dover Markem-Imaje SmartDate X60 - Operating Modes Explained

105 10056272-AA
 Printer Specific Print Options
 SmartDate X60 - Intermittent mode
This SmartDate X60 can be set to:
- High Pack Rate Operation
- Radial Ribbon Save Mode
- Interlace Mode
 SmartDate X60 - Continuous mode
This SmartDate X60 can be set to:
- High Pack Rate Operation
- Radial Ribbon Save Mode
- Interlace Mode
- High Speed Mode
 SmartDate X60 - Shuttle Continuous
This SmartDate X60 SmartDate X60 can be set to:
- High Pack Rate Operation
- Radial Ribbon Save Mode
- Interlace Mode
- High speed Mode
- Digital Ribbon Save Mode
Note: Hi Speed mode is disabled if Cost Saving Mode is selected.
Certain conditions will determine the standard of print quality achieved:
- The Substrate material being used
- The type of Ink Ribbon being used.
- The Speed at which printing is performed.
- The air pressure setting
- The Printer parameter settings
- The gap between the printhead and roller or platen.
The correct combination of all of these will greatly improve print quality.
Operation
for parts & service call QLC (800) 837-1309