110 10056272-AA
Limitations
The use of High Speed mode has major speed benefits to the customer, however,
ere are some points of this feature which must be considered when qualifying an
application.
• When High Speed mode is selected, the maximum print speed is 1000mm/ sec.
• When High Speed mode is enabled the print quality will be reduced from the high
quality achieved in standard mode.
• Just as today, where not all applications will achieve 600 mm/sec, for the new
machines not all applications will achieve 1000 mm/sec. Application qualification
is required to determine maximum speed, and the threshold speed at which the
threshold should be set.
• You will not be permitted to print in High Speed mode at speeds lower than 30 m/s.
Printing in High Speed mode at very low speeds can lead to a damaged Printhead.
• High Speed mode may reduce the quality of certain bitmaps used.
• Due to the castellation of characters with High Speed mode, it is not recommended
to print characters less than 2 mm high. The BOLD font types will typically provide
more consistent results.
Operation
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
