116 10056272-AA
Three main points must be clearly understood:
1. The print in Cost Saving Mode mode will be fainter than with Normal or Hi Speed.
2. The higher the Cost Saving Mode setting the fainter the print will be as it is using less
ribbon.
3. The correct set up of the SmartDate X60 is critical as the print gap distance and
changes in air pressure for example will affect the print quality.
The prints as they would appear on the ribbon and substrate by using different
Cost Saving Mode setting.
Image on Ribbon
Image on Substrate
None Medium Highest
Note: In situations where the substrate runs very slowly it is possible for the
ribbon to run faster than the substrate in order to achieve a print.
Operation
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
