Printer configuration
152 10056272-AA
Encoder
Encoder Type Continuous printer only.
Encoder Direction Continuous printer and Encoder Type set to Quadrature.
Encoder Resolution
Continuous printer and Encoder Type set to Quadrature or
Pulse Train.
Film Speed
Continuous printer and Encoder Type set to Internal.
Printer Mode dependant.
Speed Warnings Continuous printer only.
Print Position
Registration The maximum amount is dependant on the printer type.
Pre print Delay Continuous printer only.
Offset The maximum amount is dependant on the ribbon width.
Print Delay Intermittent printer only.
Ribbon Setup
Ribbon Color
Markem-Imaje ribbons only, some colours not available with
certain grades.
Not available when Non Markem-Imaje selected.
Ribbon Width Limited by printhead width selected.
Full Ribbon Size Only displayed if Non Markem-Imaje ribbon selected.
New Outside Diameter Only displayed if Non Markem-Imaje ribbon selected.
Core Outside Diameter Only displayed if Non Markem-Imaje ribbon selected.
Tension Adjust Maintenance Engineer Password Required.
Speed Profile Recorder
Resolution Continuous printer and Encoder set to External
Trigger Continuous printer and Encoder set to External.
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
