17 10056272-AA
General
CAUTION : Before using this printer, please read and fully
comply with these instructions, the material safety data
sheet (MSDS) for consumables used.
Introduction
This Manual along with the SmartDate X60 Instruction Booklet, set out to explain how to
safely install, operate and service your SmartDate X60 Overprinters.
The Operator Manual is available in Adobe Acrobat PDF in various languages on the
SmartDate X60 CD.
The manual format is designed to be printed onto 8» x 11» (203mm x 279.5mm) paper,
but can also be printed onto 8.5» x 11» (216mm x 279.5) (Previous MARKEM manual
paper size) or A4 (210mm x 297mm)
Alternatively a Hard bound copy of the manual can be purchased separately from
Markem-Imaje.
Please contact your local supplier for details.
Copyright Notice
Original Copyright © 2005 Markem-Imaje. All rights reserved.
Reproduction of any or part of this manual in any form whatsoever without the ex-
pressed written permission of Markem-Imaje is forbidden. The contents of this manual
are subject to revision without notice.
All efforts have been made to ensure the accuracy of the contents of this manual.
However, should any errors be detected, Markem-Imaje would greatly appreciate being
notified.
Markem-Imaje make no warranty of any kind with regard to this material, including, but
not limited to, the implied warranties and fitness for purpose. Markem-Imaje shall not be
liable for any errors contained in this material or for incidental or consequential dam-
ages in connection with the furnishing, performance, or use of this material.
The use of non genuine Markem-Imaje consumables and spare parts may adversely
affect the performance of the product and could invalidate the warranty.
Copyright © 1995 - 2011 Markem-Imaje Corporation.
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
