Diagnostics
195 10056272-AA
Settings
Machine Settings
Settings
Machine Settings
Function Description
1) Start Speed Profile Activates the speed profile recorder.
2) Stop Speed Profile De-activates speed profile recorder.
Start recording now: When pressed, the screen will open and display a please wait
message. The printer will immediately begin recording the current substrate speed –
the graph will be displayed once sufficient values have been captured.
Trigger recording on print go: When pressed, the screen will open and display a
please wait message. The printer will begin recording on receipt of a valid print go
signal. The graph will be displayed once sufficient values have been captured.
Start recording – stop on fault: When pressed, the screen will open and display a
please wait message. The printer will begin recording immediately and stop only when
a printer fault occurs. The graph will be displayed once sufficient values have been
captured.
View previously recorded graph: When pressed, the screen will immediately open
and display the previously recorded speed profile graph. This option is only displayed if
an existing profile has been captured.
Note: when Trigger recording on print go and Start recording – Stop on fault are
selected, it is not necessary to remain on the screen and wait for the profile capture to
complete. Recording will still continue in the background if you leave the screen. This
may be a sensible or necessary option when (eg) you wish to record a fault that only
sporadically occurs.
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
