Technical specifications
246 10056272-AA
Noise Levels
Test Standard BS EN ISO 3746:1996
SmartDate X60 Intermittent printer
199 ppm with a 10 mm Image
(700 mm/s) <70 dB (A)
SmartDate X60 Continuous printer
299 ppm with a 10 mm Image (160 mm bag)
(800 mm/s) 70 dB (A)
Air Supply
6 bar / 90 psi (maximum) dry,
uncontaminated.
Air Consumption
Max at 5 bar with 4.0 mm (1.6”) printhead gap
= 8.8 ml/cycle (0.15 cubic inches/cycle).
Typical at 3 bar with 1.5 mm (0.06 “) printhead gap
= 2.0 ml/cycle (0.123 cubic inches/cycle)
Printer Dimensions
SmartDate X60
180 mm (7.08”) length x 209 mm (8.22”) width x 197 mm (7.75”) height.
Allow a minimum of 100 mm above the printer for extension of the handle
and ribbon cassette removal.
Controller Dimensions
195 mm (7.67”) length x 255 mm (10.3”) width x 115 mm (4.5”)
Allow a minimum of 80 mm (3.15 ”) for the connector and cable access to
both printer and controller.
Printer Weight SmartDate X60 - 7.82 kg
Controller Weight 4.0 kg
Ribbon
Cassette loaded:
Maximum ribbon length 1100 metres (3820 Grade)
Maximum ribbon width 55 mm
Minimum ribbon width 20 mm
Colours
An extensive range of approved Markem-Imaje ribbons are available
including Black, White and a selection of other colours. Only Markem-Imaje
approved ribbon types must be used to enable / maintain / and sustain the
quality / adhesion / performance of the printer.
Font Styles Any True Type font. + Speedo and TI Corpus Christi
Font Sizes Scalable to specific point sizes.
Orientation Any mix of orientation.
Barcodes
Code 39, EAN 8, EAN 13, EAN 128, UPC A and UPC E, RSS-14 QR,
RSS-Expanded
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
