Dräger Babyleo TN500 - Display unit

Instructions for use Babyleo TN500 SW 1.0n 31
Product description
3.1.5 Display unit
Fig. 9 Display unit
8 Filter cloth for patient air (in
the sensor wall)
Filters the ambient air before it enters the
patient compartment.
9 Sensor wall Contains the device's sensors and has con-
nections at the rear.
No. Designation Description
27215
No. Designation Description
1 Alarm light Visual alarm indicator.
2 Touch screen Used for operating the graphical user inter-
face.
3 Rotary knob Used for setting and confirming set values.
4 Alarm suppression
The "Audio paused" key suppresses the
acoustic alarm signal for all active alarms for a
certain period of time. For further information,
see the following chapter: ''Suppressing and
delaying the alarm signal'' (page 127)
5 Working light
The key switches the working light on the
radiant warmer on and off. There is a choice of
3 light intensities.
6 Night light
The key switches the night light in the
patient compartment on and off.
7 Power supply indicator Indicates the mains power supply status.
Mains power supply present: LED lights green.
8 Start/standby key
The key switches the device on or off.
1
2
3
5
4
6
7
8