68 Instructions for use | Oxylog VE300 SW 1.n
Operation
To switch the device off:
1. Press the start/standby key (A) for about 3 seconds.
2. Touch the Shut down button and confirm.
The prompt Device is shutting down... is displayed.
Forcing a device shutdown:
1. Press the start/standby key (A) for about 8 seconds.
While the key is held, the Forced shutdown alarm sounds.
WARNING
Risk of patient injury
The patient will no longer be ventilated if the start/standby key is held for at least
8 seconds.
► Only force a device shutdown if no patient is connected to the device or the
patient no longer needs to be ventilated.
To Next Page
Loading...
