Dräger Oxylog VE300 - Advanced System Setup

78 Instructions for use | Oxylog VE300 SW 1.n
Configuration
9.9 Advanced system setup
To access the advanced system setup:
Standby mode
1. To move to screen 2, touch the button 1 in the top right-hand corner of the
screen.
2. Touch the button Advanced system setup (A).
Operation mode
During ventilation the Advanced system setup button is grayed out.
The following screens are intended for service personnel, and are password-
protected to prevent unauthorized adjustment. For further information, see the
following chapter: "Password", page 128.
In the advanced system setup the following settings can be displayed and changed:
– Language (B)
– Date (C)
– Time (D)
– Demo mode (E)
– On, Off
– Export data (F) (option)
– Change password (G)
– Device settings (H)
– Ventilation settings (I)
– Restore factory settings (J)
2938733059
A
BCD
E
F
G
HI J