Instructions for use | Oxylog VE300 SW 1.n 87
Logbook and system information
10.2 System information
To access the system information:
Standby mode
1. Touch the button 1 in the top right-hand corner of the screen to go to screen 2.
2. Touch the button System information (A).
Operation mode
1. To access the start dialog, touch the X button in the top right-hand corner of the
ventilation dialog.
Alternatively: Press the start dialog key on the control panel.
2. Touch button 1 in the upper right-hand corner of the screen to go to screen 2.
3. Touch the button System information (A).
The system information is displayed in 2 columns in this screen.
– Left-hand column (B): Serial number, Software version, Device ID, options,
and Date/time
– Right-hand column (C): Values for the parameters listed in the left-hand column,
information and options enabled on the device.
In addition the QR code (D) is displayed, which can be read with a corresponding
end device. The resulting link leads to the product web page of the device.
2964338399
To Next Page
Loading...
