Technical data
123
Battery charging
Savina automatically detects the voltage of the
external battery connected.
Charge current: 12 V battery approx. 4 A
24 V battery approx. 2 A
When the battery is fully charged, the charging
system switches to trickle charging.
Trickle charging is effected by short current pulses.
Charging times
The charging times indicated refer to immediate
charging of the battery after discharge.
Several successive partial discharges or
intermediate mains charging can extend the
charging time.
Type: lead-gel batteries, maintenance-free, sealed
Minimum capacity
12 V battery 30 Ah
24 V battery 15 Ah
Charging time
12 V battery < 10 hours (about 5 hours at 80 % charge)
24 V battery < 10 hours (about 5 hours at 80 % charge)
Charge current
12 V battery 4 A
24 V battery 2 A
Internal battery
Type Lead-gel battery, maintenance-free, sealed.
Charging time < 5 hours, including from external DC on-board
network
(about 1.5 hours at 80 % charge)
Protection class
Machine Class I
Temperature sensor AWT01 (sensor fitted) Type BF
Gas supply
O
2 gauge pressure 3 bar –10 % to 6 bar
O
2 connection thread NIST
The gas must be dry and free from oil and dust.
Output for pneumatic medicament nebuliser O2, max. 2 bar, max. 10 L/min
Sound pressure level 45 dB (A) for typical ventilation at 1 m distance
(for free-field measurement over
a reflecting surface)
Dimensions (W x H x D)
Basic machine 380 x 383 x 358 mm
Machine with trolley 580 x 1335 x 560 mm