The DAVC function is the package of electronic
controls (DTC, DWC, DSC) managing motorcycle
traction during the acceleration phase.
When entering the function, it is possible to select
the function to be customised (DTC, DWC, DSC).
The following selectable indications will be displayed
in this page:
-
Back
- DTC
- DWC
- DSC
- Default (visible only if one or more parameters
are different from the "default" ones)
-
Back
Every time button (1) or button (2) is pressed, the
instrument panel allows scrolling DTC, DWC, DSC
functions; once the function is highlighted, press
button (4) to enter the function to be customised.
Highlight "
Back" and press button (4) to exit the
sub-menu and go back to previous page.
For DTC function, refer to paragraph page 112.
For DWC function, refer to paragraph page 115.
For DSC function, refer to paragraph page 118.
If the DTC is disabled (set to OFF), the DWC
parameter can not be changed and is forced to level
OFF.
For DAVC function, which includes DTC, DWC and
DSC functions, it is possible to restore the
parameters set by Ducati for all the functions: press
button (1) or button (2) to highlight and select
“Default” and press button (4).
The default parameters for DAVC function, which
includes DTC, DWC and DSC functions for the
selected Riding Mode, are reset.
Fig. 48
110
To Next Page
Loading...
