EBC
The instrument panel displays EBC status through the
“Parameter and level change menu” page 53:
- if the EBC is active, the message “EBC” with the
set intervention level number (1 to 3);
- If EBC is active, but system is in degraded
operation, “EBC” message and the number, “1”
to “3” (flashing);
- when in fault, the “EBC” indication and the red
"Err" message;
- if EBC is disabled, “DTC” and “Off” indication.
The Engine Braking Control (EBC) system controls
engine braking when riding with throttle control
completely closed (both when downshifting and in a
normal cut-off with the same gear engaged, while
braking or not). This system independently adjusts
the throttle valves to ensure a consistent torque goes
back from the wheel to engine during these stages.
The system allows the rider to set "engine brake”, the
range being from a maximum engine braking with
system set to OFF and progressively decreasing as
level increases.
System is particularly sensitive at high rpm and
sensitivity gradually decreases as soon as engine rpm
decrease.
0
11:34
A.M.
RACE
Lap Off
RPM X 1000
Gear
km/h
N
10
9
8
7
6
5
4
3
2
1
11
12
13
14
15
EBC 3
DSC 2
ABS 3
SETTING MENU
TRIP 1
TOT km
1245
137.4 km
LO HI
Fig. 25
72
To Next Page
Loading...
