Ducati PANIGALE V4 - Customising Riding Mode: Restore Default Settings (All Default)

Customising Riding Mode: restore default
settings (All Default)
This function allows restoring the default values set
by Ducati for parameters (DAVC (DTC, DWC, DSC),
Engine, ABS, EBC, DQS, Info Mode) and all riding
modes: the function is only visible if at least one of the
parameters of one riding mode is not the “default”
one.
Enter the SETTING MENU.
Select Riding Mode by pressing button (1) or (2).
Once function is displayed, press button (4).
Use buttons (1) and (2) to highlight and select “All
Default”, press button (4) to reset to default values
for all three Riding Modes.
From this moment (and until one or more parameters
are customised) the "All Default" indication is no
longer visible.
To exit the menu and go back to previous page
highlight the "
Back" indication and press button
(4).
Riding Mode
Pin Code
Lap
Exit
42
1
Fig. 72
Race
All Default
Sport
Street
Back
...
42
1
Fig. 73
134