EasyManua.ls Logo

Ducati PANIGALE V4 - Checking Brake and Clutch Fluid Level

Ducati PANIGALE V4
331 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Checking brake and clutch fluid level
The levels should not fall below the MIN marks on the
respective reservoirs.
If level drops below the limit, air might get into the
circuit and affect the operation of the system
involved.
Fluid must be topped up and changed at the intervals
specified in the scheduled maintenance table
reported in the Warranty Booklet; please contact a
Ducati Dealer or authorised Service Centre.
Brake system
If you find exceeding clearance on brake lever or pedal
and brake pads are still in good condition, contact your
Ducati Dealer or authorised Service Centre to have
the system inspected and any air drained out of the
circuit.
Warning
Brake and clutch fluid can damage paintwork
and plastic parts, so avoid contact.
Hydraulic fluid is corrosive; it may cause damage and
lead to severe injuries. Never mix fluids of different
qualities. Check seals for proper sealing.
MAX
MIN
MAX
MIN
Fig. 224
MIN
MAX
MAX
MIN
Fig. 225
276

Table of Contents

Related product manuals