DQS
The instrument panel displays DQS status through
the “Parameter and level change menu” page 53:
- if DQS is enabled, “DQS U-D” indication (both
upshifting and downshifting);
- if DQS is in reduced performance mode, “DQS”
indication is displayed flashing;
- if the DQS system or the control unit is in fault,
the “Err” message is displayed in red;
- if DQS is disabled, “DQS Off “ indication.
The DQS with up/down feature allows the rider to
upshift and downshift without using the clutch lever.
It includes a two-way microswitch - built in the lever
mechanism - that outputs a signal to the engine
control unit whenever the gearshift is operated.
The system works in a separate way for upshifting
and downshifting, and combines the action on
ignition advance and injection, available in the upshift
system, with controlled throttle opening for operation
during downshifting.
Here below are some tips that will ensure you
properly exploit this feature:
- The Ducati Quick Shift takes the same shift lever
operation as with vehicle not equipped with the
Ducati Quick Shift. Ducati Quick Shift is not
designed for shifting automatically.
0
11:34
A.M.
RACE
Lap Off
RPM X 1000
Gear
km/h
N
10
9
8
7
6
5
4
3
2
1
11
12
13
14
15
ABS 3
DTC 5
SETTING MENU
TRIP 1
137.4 km
TOT km
1245
DQS
OFF
LO HI
Fig. 27
83
To Next Page
Loading...
