Average Fuel Consumption (CONS. AVG 1)
To select this function in the Function Menu, scroll the
functions available using buttons (1) and (2) to display
“CONS. AVG 1”.
The instrument panel calculates and shows vehicle
average fuel consumption.
The average consumption is displayed with the
indication "CONS. AVG 1” and the indication of the
unit of measurement (km/l or l/100 km or mpg UK or
mpg US).
The calculation is made considering the quantity of
fuel used and the distance travelled since TRIP 1 was
last reset.
When TRIP 1 is reset, the value is reset and the first
value available is displayed 10 seconds after the reset.
During the first 10 seconds when the value is not
available, on the display, three steady dashes “- - . - "
steadily as average fuel consumption.
The active calculation phase occurs when the engine
is running, even when the vehicle is stopped.
Moments when the vehicle is not moving and the
engine is off are not considered.
If button (4) is pressed when average fuel
consumption is displayed, the instrument panel will
activate the warning "CONS.AVG 1 RESET ?" in place
of the value and unit of measurement. When this
warning is active, Function Menu scrolling is not
possible.
If you press button (1) or (2), the instrument panel will
display CONS. AVG. 1 again, without resetting the
value.
If button (4) is pressed, the value of CONS. AVG 1 is
reset and the instrument panel will display CONS.
AVG 1 with “0.0” and the set unit of measurement.
Fig. 31
90
To Next Page
Loading...
