Ducati PANIGALE V4 - Trip Meter 1 (TRIP 1)

Trip meter 1 (TRIP 1)
To select this function in the Function Menu, scroll the
functions available using buttons (1) and (2) to display
“TRIP 1”.
The trip meter counts and displays the partial distance
covered by the motorcycle with the set unit of
measurement (km or mi) and is used as a basis to
calculate average fuel consumption, average speed
and trip time. The mi or km value for TRIP 1 is
displayed with the “TRIP 1” indication and unit of
measurement.
When the reading exceeds the maximum value of
9999.9 mi or 9999.9 km, distance is reset and the
meter automatically starts counting from 0 again.
If button (4) is pressed when trip meter is displayed,
the instrument panel will activate the warning “TRIP
1 RESET ?” in place of the value and unit of
measurement. When this warning is active, Function
Menu scrolling is not possible.
If you press button (1) or (2), the instrument panel will
display TRIP 1 again, without resetting the value.
While if you press button (4), value for TRIP 1 will be
reset and the instrument panel will display TRIP 1 at
“0.0” followed by set unit of measurement.
When TRIP 1 is reset, the Average Fuel Consumption
(CONS. AVG 1), Average Speed (SPEED AVG 1) and
Trip Time (TRIP 1 TIME) are reset as well.
The TRIP 1 counter is automatically reset also in the
following cases:
- when Trip time (TRIP 1 TIME) is reset;
- when Average Fuel Consumption (CONS. AVG 1)
is reset;
- due to a battery disconnection (Battery-Off);
CONS AVG 1
km/L
16.8
TRIP 1
km
137.4
km
TOT
1245
1
42
Fig. 30
88