Ducati PANIGALE V4 - DWC System Features

DWC
The instrument panel displays DWC status through
the “Parameter menu and level change” page 53:
- if the DWC is active, the message “DWC” and
the set intervention level number “1” to “8”;
- if DWC is active, but system is in degraded
operation, “DWC” message and the number,
“1” to “8” (flashing); also the DAVC warning light
(8, starts flashing;
- when in fault, the “DWC” indication, the red "Err"
message; also the DAVC warning light (8, turns
on;
- if DWC is disabled, “DWC” “OFF indication;
Warning
In case of system malfunction, contact a Ducati
Dealer or Authorised Service Centre.
Note
If DTC is set to OFF, DWC is also forced to OFF.
The Ducati Wheelie Control system (DWC)
supervises control of wheelie movement and
settings vary through eight different levels that are
calibrated to offer a different prevention and reaction
to wheelies. Each Riding Mode features a pre-set
intervention level. Level eight indicates a setting that
minimises motorcycle tendency to shift up in a
wheelie and maximises reaction to the same, if it
occurs. While level one is for expert riders and
features a lower wheelie control in terms of
prevention and less strong reaction to the same, if it
occurs.
0
11:34
A.M.
RACE
Lap Off
RPM X 1000
Gear
km/h
N
10
9
8
7
6
5
4
3
2
1
11
12
13
14
15
DWC 8
DTC 5
DSC 2
SETTING MENU
TRIP 1
TOT km
1245
137.4 km
LO HI
Fig. 23
62