LAP Time
The LAP function is available for the TRACK layout
(Fig. 8)only. LAP function information is available
when the function is activated through the Function
Menu or through the Setting Menu. When selecting
screen view in TRACK mode, the LAP function is
displayed automatically. Upon activation of the LAP
function, the display shows the timer with the first
indication "0’00’’00" and the LAP number with the
first indication "LAP – – “ (Fig. 162).
Upon the first press on FLASH button (3) the timer
starts with a resolution of one tenth of a second
("0’00’’0") and the screen displays the current LAP
number, both information flash for 1 second and then
remain steady on.
Every time the FLASH button (3) is pressed again, the
display shows the number and time of the just-ended
lap for 1 second, both flashing, then they remain
steady on for further 5 seconds. Then the timer and
the number of the new current lap (Fig. 163) are
displayed again.
If lap timer is active but motorcycle is at standstill, lap
timer is stopped after 5 seconds and it is displayed
with the initial indication "0’00’’00" and the LAP
0
11:34
A.M.
RACE
RPM X 1000
Gear
km/h
N
10
9
8
7
6
5
4
3
2
1
11
12
13
14
15
DTC 2
DQS OFF
DWC 8
SETTING MENU
TRIP 1
TOT km
1245
137.4 km
Lap - -
0’00.00
LO HI
13
Fig. 162
190
01’35.27
11:34
A.M.
RACE
Lap 7
RPM X 1000
Gear
km/h
5
10
9
8
7
6
5
4
3
2
1
11
12
13
14
15
DTC 2
DQS OFF
DWC 8
SETTING MENU
TRIP 1
0.0 km
TOT km
1245
LO HI
Fig. 163
206
To Next Page
Loading...
