number "LAP – –". The next time rider pushes the
FLASH button (3), lap timer is reactivated.
Note
When the LAP function is active, the FLASH
button takes on the dual function of high beam
"FLASH" and LAP timer start / stop (new lap start
indication).
It is possible to record the lap time, for a total of 15
consecutive laps.
Laps are numbered from 01 to 15: when lap 15 is
reached, “FULL” is displayed when button FLASH (3)
is pressed.
To delete the recorded laps, refer to LAP paragraph
page 146 of Setting menu.
For each lap, the lap time, max RPM value and max
speed value are memorised.
The instrument panel can record:
- no. 15 lap times (time between consecutive start
and stop);
- no. 15 values for max. RPM (maximum RPM
value reached in every lap);
- no. 15 values for max. speed (maximum speed
value reached in every lap);
207
To Next Page