Partial fuel reserve counter (TRIP FUEL)
To select this function in the Function Menu, scroll the
functions available using buttons (1) and (2) to display
“TRIP FUEL”.
The fuel trip meter counts and displays the distance
covered by the motorcycle on reserve (i.e. since the
Low Fuel Light, (5, turns on) with the set unit of
measurement (km or mi).
When the Low Fuel Light (5 turns on, the display
automatically shows the TRIP FUEL function,
regardless of the currently displayed function; then, it
is possible to toggle through the other Function Menu
functions.
Trip fuel reading remains stored even after Key-Off
until the motorcycle is refuelled. Count is interrupted
automatically as soon as fuel is topped up to above
minimum level.
The number (km or miles) is displayed with the
message "TRIP FUEL" and the indication of the unit of
measurement.
When the reading exceeds the maximum value of
9999.9 km or 9999.9 mi, distance travelled is reset
and the meter automatically starts counting from 0
again.
When the TRIP FUEL function is not active, the
corresponding value will not be displayed in the
Function Menu.
Fig. 35
97
To Next Page
Loading...
