When you access the function, all possible
customisation levels (levels from 1 to 3 and OFF
status) are listed on the left and the set EBC level or
status is shown on the right.
The following selectable indications will be displayed
in this page:
-
Back
- 3
- 2
- 1
- Off
-
Back
The motorbike profile with the part where you will be
acting highlighted in Light Blue will also be displayed.
With buttons (1) and (2) select the new level of
intervention desired. For each highlighted level, the
corresponding paired value in the central table
(highlighted with a black arrow
) will be displayed.
Once the desired level is highlighted, press button (4)
to memorise the new selection.
To exit the menu and go back to previous page
highlight the "
Back" indication and press button
(4).
1
Race > Engine Brake Control
3
2
1
...
Back
MIN BRAKE MAX BRAKE
42
1
Fig. 66
127