With buttons (1) and (2) it is possible to select the
measurement of which you wish to change the unit:
- if the indication is “Speed”, press button (4) to
customise the Speed unit of measurement;
- if the indication is “Temperature”, press button
(4) to customise temperature unit of
measurement;
- if the indication is “Fuel consumption”, press
button (4) to fuel consumption unit of
measurement;
- if the indication is “All Default”, press button (4)
to restore all values of the units of
measurements of all displayed measurements.
To exit the menu and go back to previous page
highlight the "
Back" indication and press button
(4).
161
To Next Page
Loading...
