Setting the units of measurement: Temperature
This function allows you to change the units of
measurement of the temperature.
As you enter this function, the instrument panel
displays the following indications:
-
Back
- °F
- °C
- Default (*)
-
Back
(*) This indication is visible only if the set parameter is
different from the "default" parameter.
With buttons (1) and (2) it is possible to select the
desired measurement or “Default” to reset the
default unit of measurement.
Once the desired function is highlighted, press button
(4) to save the selected unit.
To exit the menu and go back to previous page
highlight the "
Back" indication and press button
(4).
Temperature
Consumption
All Default
Back
Speed
...
42
1
Fig. 113
°C
°F
Temperature
Back
...
Back
°C
42
1
Fig. 114
163
To Next Page