When the calibration procedure starts, the
instrument panel displays the message "Ready"
flashing, the message "Keep Speed" with speed
range and the gear to be maintained by the user to
complete the teach-in procedure. On the right the
reference Riding Mode, current speed and gear
engaged.
Important
The teach-in procedure is allowed only at a
vehicle speed between 48 Km/h (30 mph) and 52 Km/
h (32 mph) in the 2rd gear.
When the rider complies with the required conditions
of vehicle speed and gear displayed, the instrument
panel starts system calibration: all previous
information will be displayed showing "In progress"
instead of "Ready".
Calibration is performed by keeping speed and gear
within the indicated range for 5 seconds.
Ready
Keep Speed
48 - 52 km/h
and Gear 2
Tire Setting
Race
52
2
Gear
km/h
42
1
Fig. 121
167
To Next Page
Loading...
