10) ABS LIGHT (AMBER YELLOW)
Indicates ABS status.
- Light off: ABS enabled and functioning;
- Light ON flashing: ABS in self-diagnosis and/or
functioning with degraded performance;
- Light steady ON: ABS disabled and/or not
functioning due to a fault in the ABS control unit.
11) DRL LIGHT (GREEN)
Indicates DRL lights status (not present in China,
Canada and Japan versions).
- Light OFF: DRL light off;
- Light steady ON: DRL light active;
- Light ON flashing: DRL light in fault.
12) DTC INTERVENTION (AMBER YELLOW)
- Light OFF: no intervention;
- Light steady ON: advance cut or injection cut.
13) OVER REV / IMMOBILIZER SYSTEM
Over rev:
- Light OFF: no intervention;
- Light ON flashing: limiter;
- Light steady ON: first threshold (RPM no. before
the limiter kicks in).
Note
Each calibration of the Engine Control Unit may
have a different setting for the thresholds that
precede the rev limiter and the rev limiter itself.
Immobilizer:
- Light OFF: key-on status or key-off status for over
12 hours;
- Light ON flashing: key-off status;
23