4) If the oil level is below the middle line between the
MIN and MAX marks, add oil until reaching the
maximum level indication.
Warning
Never exceed the MAX mark.
Recommendations concerning oil
It is recommended to use oil complying with the
following specifications:
- viscosity grade SAE 15W-50;
- standard API: SN;
- standard JASO: MA2.
SAE 15W-50 is an alphanumerical code identifying oil
class based on viscosity: two figures with a W
("winter") in-between; the first figure indicates oil
viscosity at low temperature; the second figure
indicates its viscosity at high temperature. API
(American standard) and JASO (Japanese standard)
standards specify oil characteristics.
298
To Next Page