- if throttle is "open" the instrument panel activates
the "CLOSE THROTTLE" (A) indication; only when
throttle is "closed" the new selected riding mode
is confirmed and memorised, and the instrument
panel goes back to "standard page" displaying;
- if throttle is "closed" but brakes are operated, the
instrument panel activates the "RELEASE
BRAKES" (B) indication and only when brakes are
released the new selected riding mode is
confirmed and memorised, and the instrument
panel goes back to standard page displaying;
- if throttle is "open" or if brakes are operated and
vehicle is moving, the instrument panel shows
"CLOSE THROTTLE AND RELEASE BRAKES" (C)
and, only after all conditions are met (closed
throttle and brakes released or vehicle stopped)
the instrument panel confirms and memorises
the new selected riding mode and goes back to
"standard page" displaying.
If the above-described conditions for “validating” the
change of Riding Mode are not observed within 5
seconds from when “CLOSE THROTTLE” or
"RELEASE BRAKES" or “CLOSE THROTTLE AND
RELEASE BRAKES” indications, the selection
procedure will be aborted and the instrument panel
will go back to displaying the page active before
Riding Mode selection started, and no settings will be
changed.
If you select “EXIT” and press button (4) (, the
instrument panel will display the main screen,
without storing the new setting (the new Riding
Mode).
52
To Next Page
Loading...
