Programming
70 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
1.25 Toolbox configuration p. 144
Hook thread monitor On/Off p. 138
Tape feeder On/Off (745-35-10 B only) p. 138
Vacuum On/Off p. 138
Downholder On/Off p. 138
Waistband clamp On/Off (745-35-10 A only) p. 138
Roll-off On/Off (745-35-10 A only) p. 138
Split needle bar On/Off (745-35-10 A only) p. 139
2.0 Machine test
2.1 Test hook thread monitor p. 152
2.2 Test roll-off device p. 153
2.3 Align light barriers p. 154
2.4 Adjust corner knife p. 156
2.5 Switch on needle + middle knife p. 150
2.6 Test tape feeder (745-35-10 A) p. 151
2.10 Test step motor p. 163
2.11 Adjust and test control panel p. 165
USB_Logging p. 151
Machine workflow test p. 159
Loading process test p. 160
Test step by step p. 161
Test cycle time p. 162
3.0 Multi test
3.3 Internal devices p. 178
3.4 External devices p. 180
3.5 Multi test I/O p. 174
3.6 Sewing motor test p. 182
3.7 Error messages p. 173
RAM test p. 179
ROM test p. 181
Menu item
Option/described
on page
To Next Page
Loading...
