Operation
Operating Instructions 878-M PREMIUM - 02.0 - 02/201826
Fig. 6: Threading the needle thread - 2-needles machine
1. Thread the machine according to the picture. The thread (2)
designed for the left needle is to be threaded in the left ten-
sioners and in the upper hole in the thread lever (3).
2. Threading the side by side arranged needles is in the picture
above.
Fig. 7: Threading the diagonally arranged needles
3. If the machine is equipped for heavy sewing, wind the thread
around the pin (1).
(1) - Pin
(2) - Left thread
(3) - Thread lever
②
①
②
③
To Next Page
Loading...
Need help?
General
