Eagle KEE E15 - Page 43

E15h SPRAYER- Alarm Setup
4.1.4
ENABLE THE APPLICATION RATE HIGH ALARM
• Press MENU
• Press ENTER to select SETUP
• Press LINE 2, the focus is on ALARM SETUP
• Press ENTER to select ALARM SETUP
• Press ENTER to select RATE ALARMS
• Press LINE 3, the focus is on RATE LOW ALARM
• Press ENTER to select RATE HIGH.
An asterisk (*) will be displayed
• Press INC/DEC buttons, to set the alarm ON or OFF
• Press ENTER to accept the changes
4.1.5
SET THE APPLICATION RATE HIGH ALARM POINT
• Press MENU
• Press ENTER to select SETUP
• Press LINE 2, the focus is on ALARM SETUP
• Press ENTER to select ALARM SETUP
• Press ENTER to select RATE ALARMS
Note:If alarm is OFF, switch the alarm ON as previously explained in Section 4.1.4
• Press LINE 3 twice to move the focus to ALARM POINT
• Press ENTER to edit the value.
An asterisk (*) will be displayed
• Press INC/DEC buttons to set the ALARM POINT as a percentage (%).
• Press ENTER to accept the changes
43
V 1.0 11/05