Eagle KEE E15 - Page 49

E15h SPRAYER- Alarm Setup
4.3.1 ENABLE THE SPEED LOW ALARM
• Press MENU
• Press ENTER to select SETUP
• Press LINE 2 the focus is on ALARM SETUP
• Press ENTER to select ALARM SETUP
• Press LINE 3, the focus is on SPEED ALARMS
• Press ENTER to select SPEED ALARMS
• Press ENTER to edit SPEED LOW.
An asterisk (*) will be displayed
• Press INC/DEC buttons, to set the alarm ON or OFF
• Press ENTER to accept the changes
4.3.2
SET THE SPEED LOW ALARM POINT
• Press MENU
• Press ENTER to select SETUP
• Press LINE 2, the focus is on ALARM SETUP
• Press ENTER to select ALARM SETUP
• Press LINE 3 the focus is on SPEED ALARMS
• Press ENTER to select SPEED ALARMS
• Press LINE 1, until focus is on ALARM POINT
Note: If alarm is OFF, switch the alarm ON. See Section 4.3.1
• Press ENTER to edit the value. An asterisk (*) will be displayed
• Press INC/DEC buttons, to set the alarm point
• Press ENTER to accept the changes
4.3.3
ENABLE THE SPEED HIGH ALARM
• Press MENU
• Press ENTER to select SETUP
• Press LINE 2 the focus is on ALARM SETUP
• Press ENTER to select ALARM SETUP
• Press LINE 3, the focus is on SPEED ALARMS
• Press ENTER to select SPEED ALARMS
• Press LINE 2, the focus is on SPEED HIGH
• Press ENTER to edit SPEED HIGH.
An asterisk (*) will be displayed
• Press INC/DEC buttons, to set the alarm ON or OFF
• Press ENTER to accept the changes
49
V 1.0 11/05