8.0. CONFIGURATION OPTIONS 77
8.1 KEY CONFIGURATION 78
8.1.1 ENABLE THE KEY BEEPER ON OR OFF 79
8.1.2 SET THE KEY BEEPER TIME 79
8.1.3 ENABLE THE KEY REPEAT 79
8.1.4 SET THE KEY REPEAT DURATION 79
8.2 ALARM CONFIGURATION 80
8.2.1 ALARM BEEPER OVERVIEW 81
8.2.2 SET THE ALARM CYCLE TIME 82
8.2.3 SET THE ALARM DUTY CYCLE 82
8.2.4 SET THE NUMBER OF ALARM CYCLES 82
8.2.5 ENABLE THE ALARM BEEPER ON/OFF 82
8.3 GENERAL CONFIGURATION 83
8.3.1 COLD RESET 83
8.3.2 FACTORY RESET 83
8.4 SWITCH CONFIGURATION 84
Table of Contents
Content Page No.
9.0. DIAGNOSTICS MODE 85
9.1 LED TEST 86
9.2 SWITCH TEST 87
9.3 KEYS TEST 88
9.4 SENSORS TEST 89
9.4.1 CHECKING LOOM VOLTAGES, FOR 3 PIN SENSORS 90
9.5 RELAYS TEST 91
9.6 REGULATOR VALVE TEST 92
9.7 EEPROM TEST 93
9.8 DISPLAY TEST 93
10. ALARM MESSAGES 94
10.1 ALARM MESSAGES OVERVIEW 94
10.2 ALARM MESSAGES 95
11. SPECIFICATIONS 98
12. WIRING DIAGRAMS
12.1 ECONOMY LOOMS 100
EAGLE CONSOLE PIN OUTS 100
TRACTOR LOOM 101
TRACTOR LOOM 102
SPRAYER LOOM 103
MK5 TO E15h ADAPTOR LOOM 104
6
V 1.0 11/05
To Next Page
Loading...