E15h SPRAYER- Operating History
6.1.1 RESET THE TOTAL VOLUME
• Press MENU
• Press LINE 2, the focus is on OPERATING HISTORY
• Press ENTER to select OPERATING HISTORY
• Press ENTER to select TOTAL HISTORY
• Press ENTER to edit TOTAL VOLUME.
An asterisk (*) will appear
• Press AUX to clear the stored value
• Press ENTER to accept the changes
6.1.2
RESET THE SUB VOLUME
• Press MENU
• Press LINE 2 the focus is on OPERATING HISTORY
• Press ENTER to select OPERATING HISTORY
• Press ENTER to select TOTAL HISTORY
• Press LINE 1 until the focus is on SUB VOLUME
• Press ENTER to edit SUB VOLUME.
An asterisk (*) will appear
• Press AUX to clear the stored value
• Press ENTER to accept the changes
6.1.3
RESET THE TOTAL AREA
• Press MENU
• Press LINE 2 the focus is on OPERATING HISTORY
• Press ENTER to select OPERATING HISTORY
• Press ENTER to select TOTAL HISTORY
• Press LINE 2 the focus is on TOTAL AREA
• Press ENTER to edit TOTAL AREA.
An asterisk (*) will appear
• Press AUX to clear the stored value
• Press ENTER to accept the changes
6.1.4
RESET THE SUB AREA
• Press MENU
• Press LINE 2 the focus is on OPERATING HISTORY
• Press ENTER to select OPERATING HISTORY
• Press ENTER to select TOTAL HISTORY
• Press LINE 2 until the focus is on SUB AREA
• Press ENTER to edit SUB AREA
• Press AUX to clear the stored value
• Press ENTER to accept the changes
62
V 1.0 11/05