Eagle KEE E15 - Page 63

E15h SPRAYER- Operating History
6.1.5 RESET THE TOTAL DISTANCE
• Press MENU
• Press LINE 2 the focus is on OPERATING HISTORY
• Press ENTER to select OPERATING HISTORY
• Press ENTER to select TOTAL HISTORY
• Press LINE 3 the focus is on TOTAL DISTANCE
• Press ENTER to edit TOTAL DISTANCE.
An asterisk (*) will appear
• Press AUX to clear the stored value
• Press ENTER to accept the changes
6.1.6
RESET THE SUB DISTANCE
• Press MENU
• Press LINE 2 the focus is on OPERATING HISTORY
• Press ENTER to select OPERATING HISTORY
• Press ENTER to select TOTAL HISTORY
• Press LINE 3 until the focus is on SUB DISTANCE
• Press ENTER to edit SUB DISTANCE.
An asterisk (*) will appear
• Press AUX to clear the stored value
• Press ENTER to accept the changes
6.1.7
RESET THE TOTAL TIME
• Press MENU
• Press LINE 2 the focus is on OPERATING HISTORY
• Press ENTER to select OPERATING HISTORY
• Press ENTER to select TOTAL HISTORY
• Press LINE 4 the focus is on TOTAL TIME
• Press ENTER to edit TOTAL TIME.
An asterisk (*) will appear
• Press AUX to clear the stored value
• Press ENTER to accept the changes
6.1.8
CHANGE TO A DIFFERENT SUB AREA
• Press MENU
• Press LINE 2 the focus is on OPERATING HISTORY
• Press ENTER to select OPERATING HISTORY
• Press ENTER to select TOTAL HISTORY
• Press LINE 4 until the focus is on SUB AREA NUMBER
• Press ENTER to change SUB AREA NUMBER.
An asterisk (*) will appear
• Press Inc/Dec buttons, to change the current sub area.
There are 10 sub-areas,(1-10)
• Press ENTER to accept the changes
63
V 1.0 11/05