Eaton DS7 - Page 209

8 SmartWire-DT
8.9 Programming
DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com 205
SmartWire-DT read response(+) – Parameter channel error
If there is an error in the parameter channel, a positive SmartWire-DT read
response(+) – Parameter channel error will be generated. The error will be
contained either in a write job or a read job.
The following table lists the PROFIdrive profile’s parameter channel errors.
The various errors that are possible when using a DS7-SWD soft starter are
marked („DS7-SWD“ column).
Table 41: Parameter channel errors with PROFIdrive
Byte Designation Description
0 Request Reference Request identification: Is echoed
1 Response-ID Response ID: 81
hex
: Read job(-); 82
hex
: Write job(-)
2 DO-ID Drive-Object-ID: Is echoed
3 No. of Parameters Number of Parameters: 01
hex
4 Format Format: 44
hex
: Error
5 No. of Values Number of values: 01
hex
6 - 9 Error Number Fault Number: 00
hex
- 23
hex
Faultnumber
[hex]
Designation Description Supplementary
information
DS7-SWD
00 Invalid parameter number Attempting to access a non-available
parameter
0 ✓
01
Parameter value cannot be
changed
Attempting to have write access to a
parameter that cannot be modified
Subindex ✓
02 Value below lower limit or above
upper limit
Attempting to have write access with a
value outside the value range
Subindex ✓
03 Bad subindex Attempting to access to a non-available
subindex in a string or array parameter
Subindex ✓
04
Not an array Attempting to use a subindex in order to
access a parameter without index
0
05 Incorrect data type Attempting to access a parameter with a
value not corresponding to the
parameter’s data type
0 ✓
06 Setting not allowed Write access with a non-zero value not
allowed
Subindex ✓
07
Description element cannot be
modified
Attempting to have write access to a
description element that cannot be
modified
Subindex
08 reserved – –
09 No description data available Attempting to access a non-available
description. The value is not available.
0 ✓
0A
reserved – –
0B No usage rights Attempting to have write access without
write permissions
0 ✓
0C
reserved – –