Eaton DS7 - Page 210

8 SmartWire-DT
8.9 Programming
206 DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com
0D reserved – –
0E reserved – –
0F No text array available Attempting to access a non-available text
array
0
10 reserved – –
11 Request cannot be carried out due
to operating status
Access is temporarily not possible 0 ✓
12
reserved – –
13 reserved – –
14 Value not permitted Attempting to have write access with a
value that is within the value range, but
that is not permitted due to other reasons
(parameter with defined values)
Subindex ✓
15
Request too long for acyclic
communication channel
The length of the current request exceeds
the maximum permitted length of the
acyclic communication channel.
0
16 Parameter address not
permissible
Not permissible or non-supported value
for attribute, No. of elements, parameter
number, subindex, or a combination
thereof
0 ✓
17
Format not permissible Write request: Invalid format or format not
permissible for this parameter
0
18 No. of values are not consistent Write request: The number of values in the
parameter data does not match the
number of values for the parameter
address.
0
19 DO does not exist Attempting to access a non-existing drive
object
0 ✓
20
Parameter text element cannot be
changed
Attempting to have write access to a
parameter text element without write
permissions
Subindex
21 Not permissible request ID unsupported service ✓
22
Response too long for parameter
manager
The length of the current response
exceeds the parameter manager’s
parameter processing capacity
23 Multiple parameter access not
permissible
Is not supported. ✓
…-64
reserved –
65-FF manufacturer specific –
Faultnumber
[hex]
Designation Description Supplementary
information
DS7-SWD