9-4 IM02601001E www.eaton.com
Functions on the Web Server Pages
Meter Page: Current Display
From the Meter page, click one of the radio buttons listed below Current to select a spe-
cic phase or neutral. The page will update to display the selection.
To view the trending, waveform, harmonics, or phasor graphs, click the drop-down box
located on the top of the page and make a selection.
When Trend and Min/Max is selected, the minimum and maximum values are displayed
on the bottom, right side of the page with date and time stamps.
When Harmonics is selected, a table is displayed showing the -
(PXM 2270 only).
By default, all the measurement options are selected when the Phasor diagram is se-
lected. You can clear an option on the left side of the page to remove the correlating point
of the phasor diagram.
Frequency measurements for the meter occur every second using phase A voltage on
V1. In the absence of voltage, there is no frequency measurement. The result is a gap
in the trend data for frequency-dependent items. A trend of frequency measurements is
maintained with date and time stamps. Minimum and maximum values are detected and
saved with date and time stamps of the occurrence.
From the Meter page, click the radio button on the left side of the page.
To view the trending and phasor graphs, click the drop-down box at the top of the page
To Next Page
Loading...
